Low NOx Gas Burner
The VitroGLO-UP is a Low NOx gas burners for application to a Regenerative Glass Melting Furnace. These burners are designed to operate at a low gas supply pressures, and provide a highly luminous adjustable flame within the melting furnace. A key feature of the VitroGLO-UP Gas Burner is that the flame length is adjustable (by up to 30%) by means of proportioning the velocities of two concentric gas jets in the visible flame, thus optimising the flame length within the furnace with ease and without the need to change the gas nozzles. On the VitroGLO-UP gas burner, this is controlled by adjusting a calibrated adjustment sleeve at the back of the burner.
In Underport firing applications, a high degree of flame coverage can be achieved, which with the high luminosity generated by the VitroGLO-UP Gas Burner, maximises the heat transfer to the glass, and minimises NOx emissions. The underport system incorporates a burner sealing system, which eliminates tertiary air and provides burner cooling to increase the nozzle operational life. The burner support bracket both supports and fixes the seal ring in place against the burner block. For underport applications, Global Combustion can provide both water cooled or air cooled block sealing systems.
Global Combustion provide two types of burner support bracket, depending on whether the bracket is to be supported from above or below the burner block. Support from above has the advantage of allowing clear access to the flux line. Both bracket designs provide simple vertical angle adjustment with an easily visible reference scale, allowing the flame position to be optimised withing the furnace. The mechanism provides accurate burner location, and allows for quick and safe removal of the VitroGLO-UP Gas burner.
Global Combustion can supply the VitroGLO-UP gas burner for retrofitting to an existing burner installation. The VitroGLO-UP gas burner is interchangeable with the Global Combustion’s VitroOIL-UP Fuel Oil Burner.
Global Combustion Systems can also provide auxiliary control equipment, including the fuel gas control system, and full supervision and commissioning services.
Gas Range: Up to 500 m3(n)/h
(to 18500 scfh)
Gas Pressure: 200—500 mBarg
(2.9 to 7.25 psig.)
Nozzle Sizes: 20—65 mm
Gas Connections: 75mm (3”)
Flame Length: Up to 14m (46 ft) (Depending on Nozzle Size combination)
Vertical Angle Adjustment: 3 to 15 deg
Vertical Height Adjustment: +/- 25mm ( +/- 1 in)
Forward/Back Adjustment: +/- 12mm(+/- 0.5 in)
Seal Ring Air
Pressure: 7.5 mBarg (3 in WG)
Flow: 40 m3(n)/h (25 scfm)
- Low NOx Levels
- High Luminosity
- Predicable Characteristics
- Reproducible Performance
- Low Maintenance
- Adjustable Flame Length
- Bracket mounting options
- Integrated seal ring and air cooling
- Vertical angle reference scale